4 Tips to Installing a TV Wall Mount

Family watching TV

It is time for you to install your TV mount but how do you go about it? What are some of the things one needs to have so they can install their TV wall mounts? How much time will one need to install their TV mount? Is such a hard task? These are some of the queries that one may have when they need to install a TV wall mount for their new television set. In this article, we shall discuss some of the tips that can help you to go about this activity.

You can visit www.aerialforce.co.uk website to learn more.

Here are 4 tips that can help you to install a TV wall mount:

  1.    The right size of TV brackets

The TV brackets are a very important aspect of the TV wall mounting process. To do it right, you will need to remove the TV base if it has one. The mounting brackets will be put on the back of the TV for a smooth mounting exercise. It is advisable that you buy a TV mounting bracket that is hardy enough to hold your TV on the wall. The center of the TV screen is recommended to be your eyes height.

  1.    Do not drill into electrical cables and pipes

This is one of the things you need to be aware of when you are thinking of installing your TV wall mount. So, how do you tell where these pipes and cables are on the walls? How can you estimate the location of electrical cables so that you can avoid them during the installation? If you already know where these pipes and cables are located on the walls, then it would be easy for you to do the installation as all you have to do is drill holes away from the pipes and cables. You can check the location of the electrical outlets for you to tell where the electric cables are located. The same case applies to the location of water taps and your sinks. These can help you to locate the water pipes on the walls.

  1.    What tools are required for the installation?

To install a TV wall mount, it is important that you have the right kind of tools. One of the best ways you can tell the kind of tools required is by reading the manual that came with the TV wall mount. In fact, it will detail the procedure of going about the TV wall mounting exercise. There are a number of tools that you will require. You will need screwdrivers-the ones with flat heads and those with crossheads. You will need an impact drill as well as a stone drill. A spirit level is suitable for you to ensure the leveling of the wall mount. A tape measure and a pair of scissors will be needed for the process too.

  1.    Place the TV on the mount

Once you have installed the frame, the next step is to place the TV on it. This is an easy step as the guide helps you do it. However, you should have someone to help you put the TV on the mount and ensure that it is properly aligned. Once you have hung the TV, ensure that it is level. If not, the high side should be grabbed and pushed down. You can also loosen the bolts on one side of the frame. Tighten the bolts on the other side until they are level and then the other bolts should be tightened.
 
 
 
 
 
 
 
 

Leave A Comment...

*

Notify me of followup comments via e-mail. You can also subscribe without commenting.